Install Instructions

2 FSD Installation Manual
Please follow all applicable codes when installing this unit.
1.Determine the fan location and preferred mounting method.
2.If needed, install the included mounting bracket on fan. Be
sure to use all four brackets and plug any unused holes.
3.Place fan in position and support with temporary fixture.
4.Connect fan to support structure. Vibration isolation mounts
(supplied by others) are recommended.
5.Once fan is secure, temporary fixture can be removed.
6.Make duct connections. Flexible connectors (supplied by oth-
ers) are recommended.
7.Make electrical connections according to the
appropriate diagram on the next page.
Mounting Illustration 1
Air
Flow
Please follow all applicable codes when installing this unit.
1.Determine the fan location and preferred mounting method.
2.If needed, install the included mounting bracket on fan. Be
sure to use all four brackets and plug any unused holes.
3.Place fan in position and support with temporary fixture.
4.Connect fan to support structure. Vibration isolation mounts
(supplied by others) are recommended.
5.Once fan is secure, temporary fixture can be removed.
6.Make duct connections. Flexible connectors (supplied by oth-
ers) are recommended.
7.Make electrical connections according to the
appropriate diagram on the next page.
Mounting Illustration 2
Air
Flow
Please follow all applicable codes when installing this unit.
1.Determine the fan location and preferred mounting method.
2.If needed, install the included mounting bracket on fan. Be
sure to use all four brackets and plug any unused holes.
3.Place fan in position and support with temporary fixture.
4.Connect fan to support structure. Vibration isolation mounts
(supplied by others) are recommended.
5.Once fan is secure, temporary fixture can be removed.
6.Make duct connections. Flexible connectors (supplied by oth-
ers) are recommended.
7.Make electrical connections according to the
appropriate diagram on the next page.
Mounting Illustration 3
Air
Flow
Please Note: Vibration Mounts and Hardware are not supplied with fan. FC Clamps are sold separately.
Fantech FSD
Series Fan
Flexible
Connections
Vibration Isolators
Flexible
Connections
Vibration Isolators
Support Structure
Fantech FSD
Series Fan
Suspended from
structure with
threaded rod
Vibration Isolators
Flexible Connection
Fantech FSD
Series Fan