August 2008 Fantech, Inc. and Fantech Limited certifies that the FRD Series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.
FRD SERIES INLINE CENTRIFUGAL FAN Features • 100% Speed Controllable • Air Flows up to 2432 cfm • Rectangular Duct Connections • External rotor motor. Sufficient service factor provided to ensure long and maintenance free operation over maximum load conditions. • Automatic Reset Thermal Overload Protection • Self lubricating/sealed for life precision ball bearings • Capable of operation in air stream temperatures up to 140°F.
FRD12-6 View from Discharge Side View 15 3/4" 2.00 117/8" 6 3/4" Static Pressure (in. WG) 1.75 5 7/8" 75/8" 13/4" 12 3/4" 11" 135/8" All dimensions in inches. RPM 1.50 1.25 2545 1.00 2030 0.75 1780 0.50 0.25 Unit Specifications: Housing Metal Thickness - 20 Gauge Approximate Weight - 18 lbs. Nominal Hp - 0.10 Hp 0.00 0 Outlet Velocity (fpm) = CFM x 2.086 Tip Speed (fpm) = RPM x 1.958 50 100 150 200 250 300 350 Flow Rate (CFM) Air Performance Data Nom. RPM 2545 Volts 115 Max.
FRD16-8 View from Discharge Side View 2.75 19 3/4" 2.50 RPM 2.25 15 3/4" Static Pressure (in. WG ) 7 3/4" 83/4" 9 3/8" 13/4" 16 1/2" 15" 17 3/8" All dimensions in inches. 2.00 1.75 1.50 1.25 2940 2000 1.00 2320 0.75 0.50 0.25 0.00 Unit Specifications: Housing Metal Thickness - 20 Gauge Approximate Weight - 23 lbs. Nominal Hp - 0.125 Hp 0 Outlet Velocity (fpm) = CFM x 1.180 Tip Speed (fpm) = RPM x 2.267 100 200 300 400 500 600 Flow Rate (CFM ) Air Performance Data Nom.
FRD16-8XL View from Discharge Side View 19 3/4" 3.50 3.00 RPM 15 3/4" Static Pressure (in. WG) 7 3/4" 83/4" 9 3/8" 13/4" 16 1/2" 15" 17 3/8" All dimensions in inches. Unit Specifications: Housing Metal Thickness - 20 Gauge Approximate Weight - 29 lbs. Nominal Hp - 0.25 Hp 2.50 2.00 2810 1.50 2135 1.00 0.50 1840 Outlet Velocity (fpm) = CFM x 1.180 Tip Speed (fpm) = RPM x 2.267 0.00 0 100 200 300 400 500 600 700 Flow Rate (CFM) Air Performance Data Volts 75 85 Nom.
FRD20-10 View from Discharge Side View 20 3/8" 2.00 1.75 9 3/4" 10 5/8" 113/8" Static Pressure (in. WG) 19 5/8" RPM 13/4" 20 1/2" 18" 213/8" All dimensions in inches. Unit Specifications: Housing Metal Thickness - 20 Gauge Approximate Weight - 41 lbs. Nominal Hp - 0.15 Hp 1.50 1.25 1640 1430 1.00 0.75 1240 850 0.50 0.25 Outlet Velocity (fpm) = CFM x 0.752 Tip Speed (fpm) = RPM x 3.199 590 0.00 0 100 200 300 400 Air Performance Data Nom.
FRD24-14 View from Discharge Side View 281/2" 2.25 2.00 133/4" 145/8" 153/8" Static Pressure (in. WG) 235/8" 1.75 n/a 243/8" 20" 251/4" All dimensions in inches. Unit Specifications: Housing Metal Thickness - 20 Gauge Approximate Weight - 62 lbs. Nominal Hp - 0.75 Hp RPM 1.50 1.25 1475 1.00 940 1660 1250 0.75 0.50 690 0.25 Outlet Velocity (fpm) = CFM x 0.443 Tip Speed (fpm) = RPM x 3.663 0.00 0 250 500 750 Air Performance Data Volts 115 Nom. RPM 1660 Max.
Three (3) Year Warranty This warranty supersedes all prior warranties DURING ENTIRE WARRANTY PERIOD: FANTECH will repair or replace any part which has a factory defect in workmanship or material. Product may need to be returned to the Fantech factory, together with a copy of the bill of sale and identified with RMA number. FOR FACTORY RETURN YOU MUST: • Have a Return Materials Authorization (RMA) number. This may be obtained by calling FANTECH either in the USA at 1.800.747.1762 or in CANADA at 1.800.565.
