Submittal Sheet

Specification Sheet
Item #: 445254
Rev Date: 2020-05-05
Automatic Air Quality Sensing Wall Control
Product #: 414729
Technologically advanced and feature-rich; the ECO-Feel provides
contractors and homeowners with a higher level of confindence over
indoor air quality. The ECO-Feel is preprogrammed to run continuously on
ECO Mode.
ECO Mode
The unique ECO Mode will automatically choose the best operating
settings based on your home’s current conditions, in order to find the
right balance between good air quality and lower energy consumption.
The ECO-Feel uses a dedicated Indoor Air Quality (IAQ) sensor to make
sure there is extra ventilation when you need it the most, such as during
cooking, cleaning and large family gatherings.
Features
• Preprogramme to run on ECO Mode continuously
• Dedicated Indoor Air Quality (IAQ) Sensor and Indoor Relative
Humidity (RH) sensor.
• Targets maintaining a 45% indoor relative humidity via ventilation,
when possible.
• Error code LED reduce troubleshooting time
• Absolutely no user input or configuration required to operate
effectively
• Peace of mind that your home ventilation control needs are met
automatically with the smart ECO Mode algorithm
External dimensions
The wall control has a dimension of 3
19
/
64
” wide x 4
19
/
32
” high x
53
/
64
” thick
(84 mm x 117 mm x 21 mm).
Communication
RS-485 Modbus
Power
12Vdc
Connector
4 wire screw terminal up to 18 AWG
Plastics
Smooth matte surface finish
Backplate
Can be mounted using screws on drywall and/or on electrical enclosure
NEMA 5-15R (Residential 120Vac single enclosure). For optimal wireless
range when using in conjunction with RTS-W wireless timer, it is
recommended to use a plastic enclosure instead of metal.
Ventilation Mode
The ECO-Feel wall control always runs at a minimum speed of 20 mins
ON/40 mins OFF per hour. Ventilate rate can be increased based on the
ECO Mode smart ventilation
Warranty
2 year warranty
ECO-Feel