Install Instructions

STEP 1
Install the left and right brackets
Install the bracket using three 10-32 machine screws
in the nutserts pre-installed in the cabinet of the unit.
Using the self drilling screw secure the top of the
bracket. Repeat for the other bracket.
STEP 2
Install the BMP
STEP 3
Secrure both sides of the BPM
to the unit using the 10-32
machine screws.
STEP 4
Connect the BPM to the unit.
A harness extension is
provided if needed.
Connect to the terminal bloc
TB3 position 10 and 12