User Guide

12102001
Installation
Important: Fan should be securely mounted to
wall prior to installation of weatherhood.
Care should be taken to
ensure that power source
to fan is locked OFF before weatherhood is installed so
that the fan creates no hazard to installer.
1. Fasten front, top, bottom, and side panels
together with 1/4 dia. x 1/2” long screws
(supplied).
2. On models 1ACC36WH thru 1ACC60WH,
fasten the center support angle to the front
and bottom panel with 1/4 dia. x 1/2” long
screws (supplied).
3. Fasten the bracket(s) to the front panel with
1/4 dia. x 1/2” long screws (supplied).
4.Fasten the screen to the face of the
weatherhood with the 1/4 dia. x 1/2” long
screws and 1.0 dia. washers (supplied).
5. Fasten weatherhood directly to the wall
(hardware not supplied).
a. Use a 1/4 x 2” masonry anchor for
masonry walls.
b. Use 1/4 x 2” lag screws if fastening to a
framed wall.
Maintenance
Make certain that
the power source is
disconnected before attempting to service or
disassemble any components! If the power
disconnect is out-of-sight, lock it in open position and
tag to prevent application of power.
CLEANING
Clean any accumulated dirt which would
restrict air flow.
24” to 60” Wall-Mounted
Weatherhoods
O
perating Instructions & Parts Manual
1ACC24WH thru 1ACC60WH
Please read and save these instructions.
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by
o
bserving all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Figure 1 - Dimensions
Description
Weatherhoods are designed to shield fan and damper openings in walls from rain and snow.
A birdscreen is included. Weatherhoods are shipped unassembled.
C
A Sq.
B
Dimensions
Guard Side
Fan Grid Panel
Model Dia. A B C Sections Gage
1ACC24WH 24” 28
1
/8” 21” 2” 1 18
1ACC30WH 30 34
1
/8 25 2 1 18
1ACC36WH 36 40
1
/8 29 2 2 18
1ACC42WH 42 46
1
/8 33 2 2 18
1ACC48WH 48 54
1
/8 38 2 2 18
1ACC54WH 54 60
1
/4 44
1
/2 22 16
1ACC60WH 60 66
1
/4 48
3
/8 2 2 16
LIMITED WARRANTY: Fantech, Inc. warrants to the original purchaser that our products will be free from defects in material and workmanship for a period of one (1) year from the date of shipment.
THIS IS OUR SOLE AND EXCLUSIVE PRODUCT WARRANTY AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ARISING BY OPERATION OF LAW OR OTHERWISE, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHETHER OR NOT THE PURPOSE OR USE HAS BEEN DISCLOSED TO US IN SPECIFICATIONS, DRAWINGS OR
OTHERWISE, AND WHETHER OR NOT OUR PRODUCTS ARE SPECIFICALLY DESIGNED AND/OR MANUFACTURED BY US FOR PURCHASER'S USE OR PURPOSE.
This warranty does not cover any losses or damages due to misuse, accident, abuse, neglect, normal wear and tear, negligence (other than ours), unauthorized alteration, use beyond rated capacity,
or improper installation, maintenance or application. This warranty shall be null and void to the extent that purchaser supplied incorrect information to us about the necessary product specifications
or the environment in which the products were to be used, and our selection or design of the products for the purchaser was based in part on such information.
If within thirty (30) days after purchaser's discovery of any warranty defects within the warranty period, purchaser notifies us thereof in writing, we shall, at our option, repair, correct or replace
F.O.B. point of manufacture, or refund the purchase price for, the products that we have found to be defective. Failure by purchaser to give such written notice within the 30-day time period shall be
deemed an absolute and unconditional waiver of purchaser's claim for such defects. Products repaired or replaced shall be covered by this warranty for the remainder of the original warranty period
or ninety (90) days from the date of shipment, whichever is longer.
Warranty claims should be sent to Fantech, Inc., Attn: Quality Department, 10048 Industrial Blvd., Lenexa, KS 66215. Included in the claim should be Order Number, Model Numbers, Serial
Numbers and a detailed description of the issues.
Purchaser assumes all other responsibility for any loss, damage or injury to persons or property arising out of the use of our products, either alone or in combination with other products or
components.
LIMITATION OF REMEDY AND LIABILITY:
THE SOLE AND EXCLUSIVE REMEDY FOR BREACH OF ANY WARRANTY HEREUNDER SHALL BE LIMITED TO REPAIR, CORRECTION OR REPLACEMENT, OR REFUND OF
THE PURCHASE PRICE UNDER THE PRECEDING PARAGRAPH ENTITLED "LIMITED WARRANTY".
FANTECH, INC. SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN PERFORMANCE AND IN NO EVENT, REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF ACTION, SHALL OUR LIABILITY TO
PURCHASER AND/OR ITS CUSTOMERS EXCEED THE PRICE PAID BY PURCHASER FOR THE SPECIFIC PRODUCT PROVIDED BY US THAT GAVE RISE TO THE CLAIM OR CAUSE OF ACTION. PURCHASER AGREES
THAT IN NO EVENT SHALL OUR LIABILITY TO PURCHASER AND/OR ITS CUSTOMERS EXTEND TO INCLUDE INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
The term "consequential damages" shall
include, but not be limited to, loss of anticipated profits, business interruption, loss of use or revenue, cost of capital, or loss or damage to property or equipment.
It is expressly understood that any technical advice furnished by us with respect to the use of our products is given without charge, and we assume no obligation or liability for the advice given, or
results obtained, all such advice being given and accepted.
For Customer/Technical Support call [phone]