Accessory List

104

Intake Guards

• Intake guards comply with OSHA regulations

• Screens are hinged and removable for easy access

• 20-gauge galvanized steel construction

• For direct- and belt-drive propeller fans

• Shipped knocked down with assembly hardware included

WARNING: O

SHA-compliant guards are required when fan is installed

within 8.2 ft. (2.5M) of floor, working level or within reach of personnel.

Review OSHA codes.

Grid Side Ship Wt. (lbs.)

Model Prop. Dimensions (In.) Guard Panel (less motor

No. Dia. (In.) A B C Sections Gauge pulleys & belts)

1ACC12SG 12 16-1/8 13 1-1/4 1 20 13

1ACC16SG

16 21-1/8 13 1-1/4 1 20 15

1ACC18SG 18 22-1/8 13 1-1/4 1 20 17

1ACC20SG 20 24-1/8 14 1-1/4 1 20 19

1ACC24SG 24 28-1/8 20 1-1/4 1 20 35

1ACC30SG 30 34-1/8 20 1-1/4 1 20 39

1ACC36SG 36 40-1/8 27 2 2 20 61

1ACC42SG 42 46-1/8 30 2 2 20 61

1ACC48SG 48 54-1/4 32 2 2 18 120

1ACC54SG 54 60-1/4 34 2 2 18 155

1ACC60SG 60 66-1/4 37 2 2 18 167

A Sq.

Wall Fan Accessories

Intake Guard

(Screen Included)

Weatherhood

(Screen Included)

Wall Collar Shown

With Fan Installed

(Not Included)

PAGE 1
Wall Fan Accessories Intake Guard (Screen Included) Wall Collar Shown With Fan Installed (Not Included) Weatherhood (Screen Included) Intake Guards • For direct- and belt-drive propeller fans • Shipped knocked down with assembly hardware included WARNING: OSHA-compliant guards are required when fan is installed within 8.2 ft. (2.5M) of floor, working level or within reach of personnel. Review OSHA codes.
PAGE 2
Wall Fan Accessories Wall Collar For direct- and belt-drive propeller fans. Galvanized steel construction. The wall collar is shipped unassembled with assembly hardware included. An easy way to install vertically mounted supply and exhaust fans. An internal flange is provided for shutter mounting. The external flange provides a flashing for the wall opening. C D A Sq. B Weatherhood Galvanized steel construction. A bird screen is included.
PAGE 3
Wall Fan Accessories Wall Dampers • Galvanized 19-gauge steel frame • Aluminum blades have felted edges for quiet operation • Frame is 3” deep with 1-5/8” flange • Pre-punched conduit hole knock-out • Optional damper motors available For direct-drive and belt-drive prop axial wall ventilators. Blades open when ventilator comes on, close when airflow stops. Model No. Damper Size (In.) Outside Flange Dimension (In.