User guide

ManualsBrandsFantec ManualsHDD/SSD enclosuresLD-H35NSU2

SPEED NAS User Guide

Overview

SPEED NAS adds advantage to sharing and managing data over internet and intranet. With account and

password management, enhances personal or company’s data security and privacy. Also, SPEED NAS

supports UPNP & XBOX 360’s music and photo files sharing to create more fun ability.

Package includes:

SPEED NAS enclosure x 1pc.

Securing Screws x 2pcs.

RJ-45 cable (Standard) x 1pc.

A to B type USB Cable (Standard) x 1pc.

Power adapter (AC100~240V to DC12V/5V 2A Dual power) x 1pc.

User Guide x 1pc.

Network and OS support

Network : Apple Safari / Linux Mozilla / Internet Explorer

Windows O.S. : Win98se / ME / 2000 / Server / XP / Vista (32/64bit)

Mac O.S. : 10.3.x or later

Linux

Hard Disk support

3.5 inch SATA I or SATA II hard drive

System setup

USB Host Driver:

Win98SE ( CD driver)

WinME / 2000 / Server / XP / Vista (None, bulk only)

Performance

USB Transmission: Full Speed 20-25MBytes/Sec. , High Speed 480Mbytes/Sec.

NAS Transmission: Upload Speed 7.5Mbytes/Sec. , Download Speed 8.5Mbytes/Sec

Before operating

First, using Windows OS’s Utility Tool “ScanIP” program to locate SPEED NAS’s IP address either on

Router, Hub or Switch Hub. After confirm IP address, type the IP address on internet browser’s URL space

to search. SPEED NAS can be found thereafter.

SPEED NAS unit has to power switch “on” in order for PC to recognize it. When changing to

LAN, switch the NAS unit power to “off”. Detach the USB cord and Attach the RJ45 cable and

switch the power to “ON” to recognize it.

Summary of content (21 pages)

PAGE 1
SPEED NAS User Guide Overview SPEED NAS adds advantage to sharing and managing data over internet and intranet. With account and password management, enhances personal or company’s data security and privacy. Also, SPEED NAS supports UPNP & XBOX 360’s music and photo files sharing to create more fun ability. Package includes: SPEED NAS enclosure x 1pc. Securing Screws x 2pcs. RJ-45 cable (Standard) x 1pc. A to B type USB Cable (Standard) x 1pc. Power adapter (AC100~240V to DC12V/5V 2A Dual power) x 1pc.
PAGE 2
Hardware Installation A. Remove the two screws on the back of the enclosure with a screwdriver. B. Loose the four screws on the surface of the unit. These screws will be used later to minimize the gap between the heat sink and your hard drive.
PAGE 3
C. The plastic bracket should slide out effortlessly. Insert your hard drive, connect the SATA interface from the enclosure accordingly. D. Secure your hard drive to the bracket with the four screws that are included in the package. E. Reverse the procedure by re-inserting the bracket to the aluminum casing and securing all the screws that was previously removed.
PAGE 4
Connecting the SPEED NAS to your Computer The SPEED NAS is a multifunctional hard drive enclosure. In addition to being a network storage device, you can also use it as a stand-alone external hard drive via the USB interface. Max OS X Driver installation is not required for systems using Mac OS 10.1.2 or above. Simply connect the SPEED NAS using the included USB cable and access the data by clicking the “Untitled” HDD icon located on your Desktop.
PAGE 5
Connecting to your Network Connect the power adapter to the back panel of the SPEED NAS and plug the other end to a wall outlet or power strip. Connect the network cable to the LAN port on the back of the SPEED NAS and the other end of the network cable to a port on your hub, switch or router. The Ethernet port on the SPEED NAS is Auto-MDI/MDIX, which means you can connect it using either a crossover or a direct network cable.
PAGE 6
Network Information IP address: (Auto) MAC address: Factory setting. DHCP Server: ON: for NAS connect at HUB, sharing status changeable (Enable / Disable) OFF: for NAS connect at Router, sharing status changeable (Enable / Disable) Service Information SMB Service: sharing status changeable (Enable / Disable). FTP Service: sharing status changeable (Enable / Disable). Disk Information DISK ID: Hard Drive Model, Firmware Version and Series Number Free Size: Hard Disk space available.
PAGE 7
IP Configuration The administrator may use this option to manually define the IP address of the SPEED NAS. If the hub/router/switch in your network has a DHCP server, then the SPEED NAS will automatically be assigned an IP address. The SPEED NAS can also act as a DHCP server when one is not present in your network. The default IP of the SPEED NAS in DHCP server mode is “169.254.0.1” and any device that is linked to the network containing will be assigned an IP of “169.254.0.x” automatically.
PAGE 8
Samba Administration Samba enables the core function of the SPEED NAS which is network file sharing. This option allows the administrator to determine the folders/directories to be shared. In here, you can create, rename and delete folders/directories in your SPEED NAS. All the folders/directories in the root directory that were previously in your hard drive before it was installed in the SPEED NAS will also be shown in the “Folder List”.
PAGE 9
FTP Configuration Abbreviated from File Transfer Protocol, FTP enables file exchange between computers on the Internet. The SPEED NAS can work as a stand-alone FTP server when it is assigned a static IP. Anonymous FTP is disabled by default. The administrator can determine if the users have read or write permission and the “Home Directory” will be the folder/directory the anonymous user can access upon logging in.
PAGE 10
Modify FTP Account: Sharing folder: set password and Read/Write function, after setting please click “Modify” UPNP AV Server SPEED NAS supports UPNP & Microsoft XBOX 360 Game Player files sharing function and only supports Photo / Music files. Set Sharing List under SMB lower level folder. After click “Set”, (Enable”Folder name”) will appear on the right. “Disable” will stop the sharing function.
PAGE 11
Disk Utility HDD format at FAT32 Sleep Time function is a power save utility when SPEED NAS is not operational. (Delay time setting is from 5~60 min.) This way can prolong the operational life of HDD. Scan Disk provides HDD internal information. (Note: If HDD format with PC under NTFS format, SPEED NAS will not recognize it.) Scan Disk [Press Start]: Show hard disk information.
PAGE 12
Access Files from the SPEED NAS – Windows In Windows, the data can be accessed by searching for the SPEED NAS in the “Network Neighborhood” (as a computer with the name “Storage”). Or you can access the data in the SPEED NAS with the following instructions. The follow screenshots are taken from a PC running Windows XP SP2 and may vary slightly from your computer screen. Click on the Windows Start button, select “Run” from the menu and a dialogue box as shown will appear.
PAGE 13
Access Files from the SPEED NAS – Mac OS If the client computer is an Apple Macintosh running Mac OS, they will have to follow the procedure below to mount each shared folder as an SMB share to access the data. These screenshots are taken from a iMac running OS 10.3.x and may vary slightly from your computer display. Under Finder, select Go >> Connect to Server or use the hotkey The next dialogue screen will prompt you for the folder that you will like to access.
PAGE 14
The next dialogue screen will prompt you for the folder that you will like to access. Select it and click the OK button. You might be prompted to enter a password, unless a password was previously assigned in the control panel, you can leave it blank. After a successful mount, a network folder icon will be created based on the folder you selected as shown.
PAGE 15
Linux Fedora 7 Kernel : 2.6.21-1.3194.
PAGE 16
Another way, URL type “SMB : //Storage/ “ Connect to Server [ Optional Share FTP ]
PAGE 17
Access Files from the SPEED NAS – Windows Standard Server™[LongHorn] Standard Server LongHorn Service Pack 1,v126 Build 6001 URL : ftp://xxx.xxx.xxx.
PAGE 18
Using SPEED NAS Utility SCANIP Step 1. Run “ScanIP” Utility Insert CD into the CD-ROM drive and click “SCAN IP.exe” When the utility window pops up, please click “search for Remote NAS” Step 2 Enter your “Storage” system and click to use the utility. Input the user name and Password. The default username and password are both “admin”. If you forget the Username and password you changed, you will need to reset NAS” by pushing And holding the reset button at the back panel for 20 seconds.
PAGE 19
Step 3 Connect the “Storage” Click on Connect, you will be prompted for the Connect Disk screen, Enter the required information to connect the Storage to your computer. Disk number: Choose disk label you want. Folder: Choose the share for folder you want to connect. Password: You can set the password for extra security. Step 4 Configure the SPEED NAS Click on Management, you will see the following screen. Status – System Information The interface is similar to the web configuration page.
PAGE 20
FAQ (Frequently Asked Questions) 1. The SPEED NAS displays error messages / crashes during the file transmission? Please ensure you update patches for your operating system frequently. The latest firmware for the NAS is also available to download from our website at: http://www. 2. Does the SPEED NAS support power management? Yes, when there isn’t any hard drive activity within 5~60 minutes, the NAS will power down to reduce power consumption. The sleep time can be configured via the web control panel.
PAGE 21
9. How to reset default setting? Please try to reset the drive as follows: 1. shut down the SPEED NAS 2. disconnect all cables except of power 3. press the RESET button, switch on the SPEED NAS and keep this button pressed for about 10 sec. 4. switch off the SPEED NAS 10. How to share data over internet? NAS shares files using Point to Point method. There are many brand of Router (ex. D-link) when using remote hosting will cause unable to link up.