Datasheet

⑤
4. Output Characteristics
4.1. Output Voltage & Current Regulation
Output Voltage Min. Current Rated current
REGULATION
+3.3V 1A 32A
±5％
+5V 1A 25A
±5％
+12V 1A 65A
±5％
-12V 0A 0.8A
±5％
+5VSB 0.5A 3.5A
±5％
Note: The combined total power from 5V & 3.3V shall not exceed 190W.
4.2. DC Output Ripple & Noise
Output Voltage
Ripple & Noise (Max.)
+3.3V 60mVp-p
+5V 60mVp-p
+12V 120mVp-p
-12V 120mVp-p
+5VSB 50mVp-p
Note:
1. Ripple & Noise bandwidth is set to 20MHz.
2.Use a 0.1uF ceramic capacitor in parallel with a 10uF electrolytic capacitor
at output
connector terminals for ripple & noise measurements.
4.3. Hold Up Time
Output Voltage 115VAC Input 230VAC Input
+3.3V
＞16ms ＞16ms
+5V
＞16ms ＞16ms
+12V
＞16ms ＞16ms
-12V
＞16ms ＞16ms
+5VSB
＞16ms ＞16ms
Note: All of dc output at full load.。
SURE STAR
SURE STAR