Specifications

Bluetooth Low Energy (BLE) 4.2 Micro Module BC832Ver1.0Nov.2016
4
1. Introduction
BluNor BC832 is powerful, highly flexible, ultra low power Bluetooth Low Energy (BLE) modules using Nordic
nRF52832 SoCs. With an ARMCortex
TM
M4F MCU, 512KB flash, 64KB RAM, embedded 2.4GHz multi-
protocol transceiver, and an integrated antenna, it allows faster time to market with reduced development cost.
The following is a block diagram of BC832. Antenna circuit and main clock are integrated. All 32 GPIOs of
nRF52832 can be accessed from main board. For lower power consumption at idle state, a 32.768 kHz crystal
is added on the main board. Connection to an external NFC (Near Field Communication) antenna is provided.
2. Codes Development Using Nordic Tools
Development tools by Nordic and other third party development tools recommended by Nordic should be
used .
Easy, fast and safe code development
Nordic development environment for nRF52832 offers a clean separation between application code
development and embedded protocol stacks. This means compile, link and run time dependencies with the
embedded stack and associated debugging challenges are removed. The Bluetooth low energy is a pre-
compiled binary, leaving application code to be compiled stand-alone. The embedded stack interface uses an
asynchronous and event driven model removing the need for RTOS frameworks.