Installation Guide

Operating Instructions – Rotary Switch

Operating Instructions – Reverse Switch

1. Select the desired airflow located on the fan motor

assembly by rotating clockwise. (Figure 1)

• 1st position – high fan speed

• 2nd position – medium fan speed

• 3rd position – low fan speed

• 4th position – fan off

Figure 1

▲

WARNING

Check to see that all connections are tight, including

ground, and that no bare wire is visible at the wire

connectors, except for the ground wire. Do not operate

fan until the blades is in place. Noise and fan damage

could result.

Installing the Canopy Housing

1. Securely attach the Canopy Housing to the Hanger

Bracket using the two screws supplied with your fan

(Figure 1)

Figure 1

NOTE: This step is applicable after the necessary wiring

is completed.

▲

WARNING

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the canopy housing

and not pinched between the housing and the ceiling.

Figure 1

Reverse Switch Information

Season Rotation Direction Switch Position

Summer

Counter-Clockwise LeftWinter

Clockwise Right

1. If airflow is desired in the opposite direction, turn

the fan off and wait for the blades to stop turning.

Slide the reverse switch on top of motor assembly to

the opposite position and turn fan on again.

(Figure 1)

Reverse

Switch