Owner Manual

LED Assembly

How to Assemble Your Light Kit

(continued)

Figure 4

Motor

Assembly

To reduce the risk of electric shock, disconnect the

electrical supply circult to the fan before installing

light kit.

CAUTION

4. Connect the 2 pin connectors from the LED

assembly to the 2 pin connectors from motor assembly.

(Figure 4)

The light source is designed for this specific

application and can overheat if serviced by untrained

personnel. If any servicing is required, the product

should be returned to an authorized service facility

for examination or repair.

CAUTION

Figure 5

Figure 6

Light Plate

Assembly

Light Plate

Assembly

Light Screw

Cover

6. Securely attach the light screw cover over the screws

in the light plate assembly utilizing the key slot twist-lock

feature. (Figure 6)

5. Assemble the LED assembly to the light plate

assembly using the screws removed in Step 3 and

securely tighten all two screws. (Figure 5)