Owner Manual

How to Assemble Your Ceiling Fan Blades (Continued)

How to Assemble Your Light Kit

Motor Assembly

Figure 1

Motor Assembly

Figure 3

3. Assemble the blade holder cover to bottom of the

motor assembly using the previously removed screws

and securely tighten all six screws. (Figure 3)

Blade Holder

Cover

Light Plate

Assembly

Light Plate

Assembly

Figure 2

Figure 3

2. Assemble the light plate assembly to the adaptor

plate of the motor assembly using the two key slots

in the light plate assembly. Replace the third screw

and securely tighten all three screws. (Figure 2)

1. Remove one of the three screws in the adaptor

plate at the bottom of the motor assembly and retain

the screw for later. Slightly loosen the remaining two

screws. (Figure 1)

3. Remove two screws in the light plate assembly

and retain the screws for later. (Figure 3)