Owner Manual

Tools Needed for As sem bly
• One Phillips head screwdriver
• One stepladder
• One 1/4 ˝ blade screwdriver
• One wire stripper
• Three wire connectors (supplied)
• Allen Wrench (supplied)
Materials
Wiring outlet box and box con nec tors must be of
type required by local code. The minimum wire
would be a 3-conductor (2-wire with ground) of the
following size:
Installed Wire Length Wire Size AWG
Up to 50 ft. 14
50-100 ft. 16
1. Check to see that you have received the fol low ing
parts:
NOTE: If you are uncertain of part de scrip tion, refer to
exploded view illustration. (Page 17)
• Downrod / Hanger Ball Assembly
• Ceiling Canopy / Hanger Bracket
• Motor Coupling Cover
• Ceiling Fan Hardware Bag
1. Threaded Rods (2)
2. Knurled Knobs (2)
3. External Lock Washers (2)
4. Mounting Flange
5. Wire leads: Black, White, Green
6. ¼-20 x 1½˝ allen head bolts (3)
7. Internal 3" dia. x ¼˝ disc
8. Wire connectors (6)
9. ½˝ wire grommet
10. ¼-20 x 3˝ Installation Rod
11. 3/16˝ allen wrench
Unpacking Instructions for the Ceiling Fan Accessory
2
Fig. 2
Motor
Coupling
Cover
Lower Inner
Packaging
Upper Inner
Packaging
Carton
Ceiling
Canopy
Downrod /
Hanger Ball
Hanger
Bracket
Ceiling Fan
Hardware bag
How to Assemble Your Ceiling Fan Accessory
▲ WARNING
Do not install or use fan if any part is damaged or
missing. This product is designed to use only
those parts supplied with this product and/or any
accessories designated specifically for use with
this product by Fanimation. Substitution of parts
or accessories not designated for use with this
product by Fanimation could result in personal injury
or property damage. Contact your retail store for
missing or damaged parts.
▲ WARNING
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 6). If
you feel you do not have enough wiring knowledge
or experience, have your fan installed by a licensed
electrician.