Instruction Manual

How to Install Your Switch Cover Assembly

2. Remove the four screws in the switch cover

assembly. Retain these screws for Step 4. (Figure 2)

3. Securely attach 3-pin connector and 2-pin connector

from motor assembly to wiring harness socket within

switch cover assembly. (Figure 3)

4. Assemble the switch cover assembly onto the

switch housing using the previously removed

screws and securely tighten all screws. (Figure 4)

1. Remove one of the three screws in the support

bracket of motor. Slightly loosen the remaining two

screws. Assemble the switch housing to the support

bracket using the two key slots in the switch housing.

Replace the third screw and securely tighten all three

screws. (Figure 1)

Figure 3

Figure 1

Figure 2

Switch Housing

Switch Cover Assembly

Switch Cover

Assembly

Figure 4

Motor

Assembly