Installation Guide

7
How to Hang Your Ceiling Fan
1. Securely attach the ceiling junction box acceptable for
ceiling fan support into the building structure. Junction
box is not supplied with the fan. (Figure 2)
Figure 1
WARNING
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before hanging.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
WARNING
The fan must be hung with at least 7´ of clearance from
floor to blades. (Figure 1)
Floor
Ceiling
No
less than
7 ft
Figure 2
NOTE: Supply wires
omitted for clarity
Outlet Box
2. Using the ceiling junction box screws provided with the
ceiling junction box, securely attach the ceiling bracket to
the ceiling junction box as shown. (Figure 3)
Figure 3
WARNING
The outlet box must be securely anchored and capable
of withstanding a load of at least 35 lbs. Hanger bracket
must seat
rmly against outlet box. If the outlet box is
recessed, remove wallboard until bracket contacts box.
If bracket and/or outlet box are not securely attached,
the fan could wobble or fall.
Wood Member
(2Ýx 4Ý Approx.)
Ceiling Joist
Ceiling
Junction
Box Screw(2)
Junction Box
Ceiling Support
Cable
Ceiling Bracket