The Urbanjet ™ Oscillating Desk Fan Net Weight 5.06 lbs. or 2.3 kg. Model No.
Important Safety Instructions WARNING: To avoid fire, shock and serious personal injury, follow these instructions. 1. Read your owner’s manual and safety information before installing your new fan. Review the accompanying assembly diagrams. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally.
Electrical and Structural Requirements ELECTRICAL REQUIREMENTS ▲WARNING Table fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. 5 ½ ft power cord included. NOT for Damp Location Use. To avoid fire or shock, follow all wiring instructions carefully. Any electrical work not described in these instructions should be done or approved by a licensed electrician. How to Set Up Your Desk Fan 1. Carefully remove from package. Plug cord directly into the socket.
Maintenance 1. To clean the fan, first unplug the fan from the socket, then clean it with a soft cloth. 2. Never wet or immerse the motor, oscillating mechanism, switch, power cord or plug. 3. To clean the fan blade, please remove the fan grille by loosening to the screws of grille. Please fit the cover onto the fan and tighten the screws of grille after maintenance and before use. CAUTION Do not use water when cleaning your fan.
Service Parts Urbanjet ™ Fan – Model #FP7958** 1 5 Ref # 6 2 Description Part # 1 Fan grille AP795801CH 2 Blade AP795803BL 3 4 Tilt angle adjusting knob Speed Knob P795810BL P795805BL 5 Handle P795827CH 6 Oscillating knob P795823CH 3 4 How To Order Parts When ordering repair parts, always give the following information: • Part Number • Part Description • Fan Model Number Contact your retail store for repair parts.
Copyright 2014 Fanimation 10983 Bennett Parkway Zionsville, IN 46077 (888) 567-2055 FAX (866) 482-5215 Visit Our Website @ www.fanimation.com 2014/12 V.
