Installation Guide

Copyright 2019 Fanimation
2019/03 V.01
10983 Bennett Parkway
Zionsville, IN 46077
[phone] • FAX [phone]
Outside U.S. call [phone]
WWW.FANIMATION.COM
10. Check the operation of the light kit
by gently pulling on the pull chain.
• 1
st
Pull= On
• 2
nd
Pull= Begins dimming
• 3
rd
Pull= Stops dimming
• 4
th
Pull= Off
WARNING
To reduce the risk of fire, electric
shock, and injury to person, must be
installed with G1** (bowl glass) that
are marked on F5** to indicate the
suitability with this model. Other
shades cannot be substituted.
WARNING
To avoid possible fire or shock, make
sure that the electrical wires are
completely inside the fan housing and
not pinched between the switch cup
housing and the switch cup flange.