Installation Guide

x 12

Pan Head Screw

HARDWARE USED:

x 6

Pan Head Screw

HARDWARE USED:

x 3

Pan Head Screw

HARDWARE USED:

Motor

Blade Holder with

Blade Support

Pan Head Screw

(4 per assembly)

NOTE: Periodically check blade holder hardware and

resecure if necessary.

To reduce the risk of personal injury, do not bend the

blade holders when installing, balancing the blades

or cleaning the fan. Do not insert foreign objects in

between the rotating blades.

WARNING

4. Secure the blade holder with blade support to the

threaded holes located on the bottom of the motor.

(Figure 4)

How to Assemble Your Ceiling Fan Blade Holder and Blade Support (continued)

NOTE: Periodically check blade support hardware and

resecure if necessary.

2. Position blade support under blade holder and

aligning blade support holes with hole in blade holder.

Make sure the blade support is fully seated against and

install with 1/4˝-20 screws. (Figure 2)

3. Position blade support under another blade support

and aligning blade support holes with hole in another

blade support. Make sure the blade support is fully

(Figure 3)

Figure 2

Blade Support

Blade Holder

Pan Head Screw

(2 per assembly)

Pan Head Screw

(1 per assembly)

Figure 3

Figure 4