Installation Guide

Canopy Screw

Cover

Ceiling Canopy

How to Install Your Canopy Housing

2. Securely attach and tighten the canopy screw cover

over the shoulder screws in the hanger bracket utilizing

the keyslot twist-lock feature. (Figure 2)

WARNING

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the canopy

housing and not pinched between the housing and the

ceiling.

NOTE: This step is applicable after the neccessary wiring is completed.

Figure 2

Figure 1

1. Assemble canopy by rotating key slot in canopy over

shoulder screw in hanger bracket

and care not to pinch

the wires.

Tighten shoulder screw. Fully assemble and

tighten second shoulder screw that was previously

removed. (Figure 1)

How to Assemble Your Ceiling Fan Blades

Figure 1

x 36

HARDWARE USED:

Serrated Head

Screw

1. Assemble the blade to the blade support with the

serrated head screws and blade plates. Make sure

that the blades are fully seated against the blade

supports and tighten screws. (Figure 1)

Serrated Head

Screw

(3 per assembly)

Blade Plate

Blade

Blade Support