Installation Guide

How to Install Your Remote Control

Figure 1

Figure 2

Figure 3

1. Installing Wall Holder: (Figure 1)

Attach wall holder using the two provided screws.

Maintenance

Do not use water when cleaning your ceiling fan.

It could damage the motor or the finish and create

the possibility of electrical shock.

CAUTION

How to Clean Your Ceiling Fan Blades

1. Periodic cleaning of your new ceiling fan is the only

maintenance that is needed. When cleaning, use only

a soft brush or lint free cloth to avoids cratching the

finish. Abrasive cleaning agents are not required and

should be avoided to prevent damage to finish.

LED

Assembly

LED

Assembly

Motor

Assembly

Motor

Assembly

1. Remove six screws and LED assembly on the motor

assembly and retain the screws and LED assembly for

later. Unplug the 2 pin connector from the LED

assembly and motor assembly. (Figure 2)

Periodic light dusting of the blades is recommended.

A feather duster will work best. Avoid using water,

cleansers, or harsh rags, which can warp and ruin the

finish.

2. After cleaning the fan, connect the 2 pin connector

and reassemble the LED assembly to the motor

assembly by previously removed screws. (Figure 3)

WARNING

To avoid possible shock, be sure electricity is turned

off at the main fuse box before cleaning. (Figure 1)

Figure 1

MAIN FUSEBOX