Use and Care Guide

How to Assemble the Ceiling Fan

Assembling and Mounting the Switch Cap Assembly

Blades (continued)

1. Disassemble the switch housing cover from

the switch housing adapter assembly by removing

screws and retain the screws for Step 5. (Figure 1)

2. Remove the three screws in the support bracket

and retain the screws for next step. (Figure 2)

3. Assemble the switch housing adapter assembly to

the housing support bracket using the previously

removed screws.

(Figure 3)

NOTE: Periodically check blade holder hardware and

resecure if necessary.

3. Secure the blade holders to the bottom of the motor

assembly using the 1/4Ý-20 screws. (Figure 3)

To reduce the risk of personal injury, do not bend the

blade holders when installing, balancing the blades

or cleaning the fan. Do not insert foreign objects in

between the rotating blades.

WARNING

Switch Housing

Adapter Assembly

Figure 3

HARDWARE USED:

x 10

SCREWS

2. Remove and discard the motor stops from the

motor assembly by removing the screws. (Figure 2)

Motor Assembly

Figure 2

Motor Stops

Figure 3

Blade Holde

Screws

(2 per assembly)

Switch Housing

Adapter Assembly

Figure 1

Switch

Housing

Cover

Figure 2

Motor Assembly