Installation Guide

How to Install Your Canopy Housing

2. Securely attach and tighten the canopy screw cover

over the shoulder screws in the hanger bracket utilizing

the keyslot twist-lock feature. (Figure 2)

WARNING

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the canopy

housing and not pinched between the housing and the

ceiling.

NOTE: This step is applicable after the neccessary

wiring is completed.

Canopy Screw

Cover

Figure 2

Ceiling Canopy

Figure 1

1. Assemble canopy by rotating key slot in canopy

over shoulder screw in hanger bracket. Tighten

shoulder screw. Fully assemble and tighten second

shoulder screw that was previously removed.

(Figure 1)