Use and Care Guide

11
How to Assemble Your Light Kit Assembly
1. Remove the three screws in the switch housing
adapter. Retain the screws for Step 3. (Figure 1)
Motor Assembly
Switch Housing
Adapter
Switch Housing
Adapter
Light Fitter
Assembly
Light Fitter
Assembly
Light Fitter
Assembly
Light Fitter
Assembly
Glass
Retainer
Glass Retainer
Figure 2
Figure 3
Figure 4
Figure 5
Glass
Socket
Bulb
Figure 6
Figure 1
2. Securely attach the 9-pin connector from the motor
assembly to the wire harness socket within the light
fitter assembly. (Figure 2)
3. Assemble the light fitter assembly to the switch
housing adapter using the previously removed
screws and securely tighten all screws. (Figure 3)
4. Remove the glass retainer from the light fitter
assembly and retain the glass retainer for next step.
(Figure 4)
5. Securely attach the glass to light fitter assembly
with the glass retainer by threading the retainer
clockwise into place. (Figure 5)
6. Insert light bulbs into sockets. (Figure 6)