Installation Guide

How to Assemble Your Ceiling Fan Blades (continued)

2. Remove the two set screws and locking nuts of

the downrod support from the motor assembly then

retain the screws and nuts for How to Assemble

Your Ceiling Fan, Step 4. (Figure 2)

3. Remove the six preassembled screws of the motor

coupler washer from the motor assembly, then retain

the screws for reinstallation in Step 7. (Figure 3)

WARNING

To reduce the risk of personal injury, do not bend the

blades when installing, balancing or cleaning the fan.

Do not insert foreign objects in between the rotating

blades.

5. Slide the blade through the slot in the motor

assembly and attach to the motor hub using the

3/16˝-24 washer head screws and fiber washers.

Tighten washer-head screws with fiber washers to

secure the blade to the hub of motor assembly.

(Figure 5)

4. Lift away the motor coupler washer and upper

housing cover from the motor assembly and set aside.

(Figure 4)

x 15

FIBER WASHER

HARDWARE USED:

WASHER HEAD

SCREWS

3/16˝-24 Washer Head Screw

with Fiber Washer

(3 per blade)

Figure 5

Blade

Motor Assembly

Figure 2

Motor

Assembly

Downrod Support

Figure 3

Motor Assembly

Figure 4

Uupper Housing

Cover

Motor Coupler

Washer