Installation Guide

16
How to Assemble Your Light Kit (continued)
Figure 5
Figure 6
Light Kit
Light Kit
Light Kit
LED Assembly
Glass
Figure 3
LED Assembly
Figure 4
Motor
Assembly
6. Secure the glass to
light kit by twisting in a
clockwise direction. Do not over-tighten. (Figure 6)
5. Assemble the LED assembly to the light kit using
the removed screws from Step 3 and secure all three
screws. (Figure 5)
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
CAUTION
3. Remove the three screws in the light kit and retain
the screws for later. (Figure 3)
4. Connect the 2 single pin connectors from the LED
assembly to the 2 single pin connectors from motor
assembly. (Figure 4)