Installation Guide

12
How to Wire Your Ceiling Fan
MAIN FUSE BOX
Figure 2
Figure 1
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring
(Figure 2).
WARNING
NOTE:
If you are not sure if the outlet box is
grounded, contact a licensed electrician for advice, as
it must be grounded for safe operation.
CAUTION: INCORRECT WIRE CONNECTION WILL
DAMAGE THIS RECEIVER.
1. To set the code on receiver unit, slide dip switches
to the same positions as set on the remote. (Figure 1)
2. Slide receiver unit into the Hanger Bracket.
(Figure 3)
Dip Switch
ON DIP
1 2 3 4 5
Receiver Unit
Receiver Unit
NOTE: The remote unit has 32 different code
combinations. To prevent possible interference from
or to other remote units, simply change the combination
code in the remote and receiver.
NOTE: Factory setting is all up. Do not use this
position.
ANTENNA
(Leave connected
and do not cut)
WIFI Antenna
Hanger Bracket
Figure 3