Installation Guide

How to Assemble Your Ceiling Fan Blades (continued)

7. Securely tighten the six screws that were previously

removed in Step 3 on the motor assembly.

(Figure 7)

Figure 7

Figure 1

Figure 2

How to Assemble Your Ceiling Fan

Downrod

Set Screw

Hanger Ball

1. Remove the hanger ball portion from the downrod/

hanger ball assembly by loosening the set screw in the

hanger ball until the ball falls freely down the downrod.

Remove the pin from the downrod, then remove the

hanger ball. Retain the pin and hanger ball for reinstal-

lation in Step 6. (Figure 1)

2. Remove the hairpin clip and clevis pin from the

bottom of the downrod. Retain the pin and clip for

reinstallation in Step 4. (Figure 2)

Hairpin Clip

Clevis Pin

Motor

Assembly

6. Re-assemble the upper housing cover and motor

coupler washer as shown. (Figure 6)

Figure 6

Motor Coupler

Washer

Upper Housing

Cover