Installation Guide

How to Assemble Your Light Kit (continued)
13
Figure 5
Figure 6
6. Secure the glass to
light kit by twisting in a
clockwise direction. Do not over-tighten. (Figure 6)
5. Assemble the LED assembly to the light kit using
the removed screws from Step 3 and secure all three
screws. (Figure 5)
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
CAUTION
Light Kit
Light Kit
Light Kit
LED Assembly
Glass
3. Remove the three screws in the light kit and retain
the screws for later. (Figure 3)
Figure 3
Light Kit
2. Assemble the light kit to the support bracket using
the two key slots in the light kit. Replace the previously
removed screw and securely tighten all three screws.
(Figure 2)
LED Assembly
4. Connect the 2 single pin connectors from the LED
assembly to the 2 single pin connectors from motor
assembly. (Figure 4)
Figure 4
Motor
Assembly
Figure 2