Installation Guide

NOTE: This step is applicable after the neccessary

wiring is completed.

How to Install Your Canopy Housing

Shoulder Screw

1. Assemble canopy by rotating key slot in canopy

over shoulder screw in hanger bracket, taking care not

to pinch the wires. Tighten shoulder screw. Fully

assemble and tighten second shoulder screw that was

previously removed. (Figure 1)

2. Securely attach and tighten the canopy screw cover

over the shoulder screws in the hanger bracket

utilizing the key slot twist-lock feature. (Figure 2)

WARNING

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the canopy

housing and not pinched between the housing and the

ceiling.

Canopy Screw

Cover

Ceiling

Canopy

Figure 1

Figure 2