Dimensions Guide

LOCATION USE:
Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 172 4929 76 0.54 64
Med 115 3331 109 0.37 31
Low 66 1905 170 0.22 11
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical junction
box capable of withstanding a load of at least 35 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC, 60 Hz,
15 amp circuit.
BLADES:
A set of five 22˝ plywood blades is included.
LIGHTING OPTIONS:
MOTOR SPECS:
153 x 20 AC motor is designed for optimal performance
with this fan.
One 18-watt LED included.
ON/OFF and dimmable pull chain control.
Fan is rated for dry location only.
Light Bulb Information (120V)
Bulb Type Watts Lumens Amount Color Temp CRI
18 1 1500 3000 90%
LED
QTY
Energy Guide FTC
Power
(Wave)
Total Air Delivery
(CFMave)
Estimated Yearly
Energy Cost ($)
Ceiling Fan
Efficiency
(CFM/W)
39 4100 11 104
A IRE D ROP
PULL CHAIN
™
B
Fan w/4.5˝ downrod 14.95˝ 11.25˝
Fan w/12˝ downrod 22.45˝ 18.75˝
Fan w/18˝ downrod 28.45˝ 24.75˝
Fan w/24˝ downrod 34.45˝ 30.75˝
Fan w/36˝ downrod 46.45˝ 42.75˝
Fan w/48˝ downrod 58.45˝ 54.75˝
Fan w/60˝ downrod 70.45˝ 66.75˝
Fan w/72˝ downrod 82.45˝ 78.75˝
A
DOWNROD OPTIONS:
CONTROL OPTIONS:
Three fan speeds pull chain control included. The reverse
switch is located on the switch housing. Optional WC2WH,
WR501WH and CWRL4 wall controls and BTCR9, CRL4WH
and CR500 remote controls and BTR9 receiver unit and
WFR50 WiFi receiver unit are available —sold separately.
Instructions are provided with each control.
LP7654**
52˝ Ceiling Fan
Net Hanging Weight: 17.00 lbs
Ceiling
7´ min
12° Blade Pitch
A
B
Blade Sweep = 52" dia
Fan comes with a 1˝ Dia. x 4.5˝ downrod (DRT1-45). Optional
downrods are available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝ and 72˝.
For installations requiring a longer downrod, a downrod coupler is
available. Fan can be mounted on a sloped ceiling up to 19°.
Optional close-to-ceiling kit is available as well—sold separately.
Optional sloped ceiling kits (SCK1-52) are available for up to 42°.
Call technical support for more information.
Available Finishes
LBNCDW
LBNBB
Brushed Nickel with Gray/Black
Reversible Blade and Opal Frosted Shade
Brushed Nickel with with Cherry/Dark Walnut
Reversible Blade and Opal Frosted Shade
LBL
LGR
LMW
Black with Black Blade and Opal Frosted
Shade
LAZ
Aged Bronze with Cherry/Dark Walnut
Reversible Blade and Opal Frosted Shade
Matte White with Matte White Blade
and Opal Frosted Shade
Matte Greige with Weathered Wood Blades
and Opal Frosted Shade