User Guide

Overview of Your Heat Press
1. Pressure Adjustment Knob
2. Time/Temperature Control
3. Open/Close Control Arm
4. Top Platen
5. Bottom Platen
6. Reset button/Breaker switch
7. Power cord
8. On/O Switch
The Pressure Adjustment Knob controls the amount of force that will be used to push the
transferred image into the fibers of the garment. Clockwise increases pressure. Counter
clockwise decreases it.
The Time/Temperature Control Panel on the left upper face of the casing is where you will
set heat and time requirements of your project. These will vary depending on the vinyl or
transfer paper used.
The Control Arm opens & closes the top & bottom Heated Platens of the clamshell press.
The Reset Button is a breaker. It will pop out when there is an overload of electricity. Press
it in to reset.
The Power switch must be set to the on position and the Cord must be plugged in before
pressing.