Specification Sheet

PRODUCT SPECIFICATIONS
50' Vertical Lifeline 8150T
Features
· Superior resistance to abrasion and UV light.
· Superior hockle resistance.
· Five-tuck splice for superior strength and safety.
· Exclusive steel thimble resist wear and extend the
life of the line.
Material Specifications
Rope: 5/8" Polyester; Min. 5,600 lbs. tensile strength
Connectors: Alloy Steel; Min. 5,000 lbs. tensile strength
Thimble: Alloy Steel
Connector Gates:
Alloy Steel; Min. 3,600 lbs. front and
side load
Performance Specifications
Tensile Strength: Min. 5,600 lbs.
Max. Capacity: 310 lbs.
Relevant Standards
OSHA: CFR1926.502, CFR1910.66
ANSI: A10.32-2004, Z359.1-2007
Z359.12-2009
Warnings
· Read, understand and follow all labels and instructions prior to use.
· Inspect before each use.
· Remove from service if there is evidence of damage or excessive wear.
UNDERSTOOD PRIOR TO USE. FAILURE TO READ AND FOLLOW ALL PRODUCT WARNINGS AND INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
· Snap hook at the anchor-end and a taped trailing end.
FallTech 1306 S. Alameda St. Compton, CA 90221 Tele: 323-752-0066 www.falltech.com
· Protective PVC shrink tubing protects the spliced ends.
WARNING: THIS SPECIFICATION SHEET PROVIDES AN OVERVIEW OF PRODUCTS AVAILABLE FROM FALLTECH. CARE HAS BEEN TAKEN TO ASSURE THE ACCURACY OF
THE INFORMATION. IT DOES NOT PROVIDE IMPORTANT PRODUCT WARNINGS AND INSTRUCTIONS. FALLTECH RECOMMENDS ALL USERS OF FALL PROTECTION
EQUIPMENT UNDERGO THOROUGH TRAINING, AND THAT ALL WARNINGS AND INSTRUCTIONS PROVIDED WITH THESE PRODUCTS BE THOROUGHLY READ