Operation Manual

37
How to deal with problems
EN
Flashing LED Fault message Remedy
»Car 2« +
»laden«
Fault during char-
ging
X
Start the charging proce-
dure again.
X
If the fault message still
appears: Consult FALLER’s
customer service depart-
ment.
»Car 2« +
»laden« +
»voll«
Voltage of rechar-
geable battery
is wrong
This is no original rechargeable
battery or it is faulty.
X
Consult FALLER’s customer
service department.
»Car 2« +
»Car 1«
Parameters could
not be transmitted
X
Check whether you have
connected and switched on
a digital vehicle.
Charging unit is faulty.
X
Consult FALLER’s customer
service department.
»Car 2« +
»Car 1« +
»laden«
Vehicle’s voltage
details do not cor-
respond with the
measured voltage
X
Send vehicle for examina-
tion to FALLER’s customer
service department.
»Car 2« +
»Car 1« +
»voll«
The wrong vehicle
has been connec-
ted:
An analog vehicle
has been connec-
ted, but key »Car
2« was pressed
X
Press the key »Car 1«.
»Car 2« +
»Car 1« +
»laden« +
»voll«
Temperature in
vehicle is too high
at the start of the
charging procedure
X
Operate vehicle and char-
ging unit at a cooler place.
Tab. 5: How to deal with problems – with a digital vehicle