Operation Manual

36
How to deal with problems
EN
Flashing LED Fault message Remedy
»Car 1« +
»voll«
No rechargeable
battery connected
X
Check whether a cable is
broken in the vehicle, by
rotating the plug by 180°
on the vehicle's underside
and repeating the proce-
dure.
X
If the fault message still
appears:
Consult FALLER’s customer
service department.
»Car 1« +
»laden« +
»voll«
Voltage of recharge-
able battery
is wrong
This is no original rechargeable
battery or it is faulty.
X
Consult FALLER’s customer
service department.
Tab. 4: How to deal with problems – with an analog vehicle
Fault messages – Digital vehicle (Car 2)
Flashing LED Fault message Remedy
»Car 2« Vehicle cannot
be read
X
Check whether you have
connected and switched on
a digital vehicle.
X
If you have connected an
analog vehicle: start the
charging procedure by pres-
sing the »Car 1« key.
»Car 2« +
»voll«
Polarity of rechar-
geable battery has
been inverted
X
Check whether you have
connected and switched on
a digital vehicle.
X
Rotate the plug of the char-
ging cable by 180° and
start the charging procedure
again.