Operation Manual

General view of product

Ports Description

»16 VAC« Port for supply voltage

(16 V alternating voltage)

»Digital -

Zentrale«

Port for a digital center

allowing to program the vehicles

»I + I Car 1«

»+ I Car 2«

Vehicle port with pin assignment for

analog and digital vehicles

Keys Description

»F0« – »F4« Functional keys allowing to switch

special functions on and off

»programmieren« Activates the programming mode

»Car 1 analog

NiMH«*

Starts the charging procedure for an analog vehicle

»Car 2 digital

Li-Ion«**

Starts the charging procedure for a digital

vehicle***

LED Description

»F0« – »F4« Show the state of special functions whenever the

vehicle is connected and switched on. Also show

the current status of the charging procedure

»program mieren« Lights up when the programming mode is activated

»Car 1 analog

NiMH«

Is lit whenever an analog vehicle is being charged

Flashes 1x every minute during the charging procedure

»Car 2 digital

Li-Ion«

Is lit whenever a digital vehicle is being charged***

Flashes 1x every minute during the charging procedure

»laden« Is lit whenever a vehicle is being charged

»voll« Lights up whenever a vehicle is fully charged

Flashes to the heartbeat when no key is actuated

Tab. 1: Operating elements

* hereinafter referred to as: Car 1. ** hereinafter referred to as: Car 2. ***

both digital vehicle with Li-Ion rechargeable battery and digital vehicle with

NiMH rechargeable battery