Operation Manual

Programming the vehicle’s functions

Press the “Programmieren” key of the charging unit.

Programme the values you want the CVs to have. You will ﬁnd the

standard values and ranges to be complied with in Table 2 “Conﬁgu-

ration Variables”.

CV Description Value Range

»1« Digital address 3 1-127

»2« Minimum speed 1 1-63

»3« Time lag on starting 5 1-63

»4« Time lag on braking 10 1-63

»5« Maximum speed 63 1-63

»6« Average speed 25 1-63

»7« Version

»17« Long address High Byte 199 0-255

»18« Long address Low Byte 208 0-255

»20« Normal speed 50 0-255

»21« Slow speed 25 0-255

»23« Light PWM lighting Rear lights 8 0-32

»24« Waiting time A on switching the ope-

rating voltage on - in 0.5 s steps

6 0-255

»25« Waiting time B after motor standstill

up to stop lights off - in 0.5 s steps

6 0-255

»26« Waiting time C after motor standstill

up to headlights off - in 0.5 s steps

20 0-255

»27« Waiting time D up to motor start via

magnetic switch - in 0.5 s steps

1 0-255

»28« Light PWM lighting Headlights 8 0-32

»29« DCC Conﬁguration

Bit 0 = Inverting the motor’s direction

of rotation

Bit 1 = 1 = 28 driving speeds

Bit 5 = 1 long address

6 0-255