User manual

6
7 Running time Step 5
Step 6: Motor 2 starts upwards, Motor 1 gets new speed)
68 Speed M1 in Step 6
6
9 Start delay M1 in Step 6
70 Speed M2 in Step 6
71 Start delay M2 in Step 6
Step 7: (wait until Motor 2 at the top, stop Motor 2, running time Step 7)
72 Running time Step7
Step 8: (start Motor 2 downwards, Motor 1 new speed)
73 Speed M1 in Step 8
74 Start delay M1 in Step 8
75 Speed M2 in Step 8
76 Start delay M2 in Step 8
Step 9: (wait until Motor 2 at the bottom, stop Motor 2, Motor 1 new delay and Speed=0)
77 Start delay M1 in Step 9
Step 10: (wait until Motor 1 Speed =0, new start if start key closed)
78 Waiting time between two rides in 0.5 s steps
80 Triggering outputs Sound and LED Step 0 (Bit0-1 = A1-A2, Bit4-7=L1-L4)
81 Triggering outputs Sound and LED Step 1 (Bit0-1 = A1-A2, Bit4-7=L1-L4)
82 Triggering outputs Sound and LED Step 2 (Bit0-1 = A1-A2, Bit4-7=L1-L4)
83 Triggering outputs Sound and LED Step 3 (Bit0-1 = A1-A2, Bit4-7=L1-L4)
84 Triggering outputs Sound and LED Step 4 (Bit0-1 = A1-A2, Bit4-7=L1-L4)
85 Triggering outputs Sound and LED Step 5 (Bit0-1 = A1-A2, Bit4-7=L1-L4)
86 Triggering outputs Sound and LED Step 6 (Bit0-1 = A1-A2, Bit4-7=L1-L4)
87 Triggering outputs Sound and LED Step 7 (Bit0-1 = A1-A2, Bit4-7=L1-L4)
88 Triggering outputs Sound and LED Step 8 (Bit0-1 = A1-A2, Bit4-7=L1-L4)
89 Triggering outputs Sound and LED Step 9 (Bit0-1 = A1-A2, Bit4-7=L1-L4)
90 Triggering outputs Sound and LED Step 10 (Bit0-1 = A1-A2, Bit4-7=L1-L4)
95 Minimum speed Motor 1 (Speed: from 0 to CV76 and from CV76 to 0)
96 Minimum speed Motor 2
100 1 = Test mode, 0 = Normal operation
101 Pulse Width Modulation prescaler for PWM freq. when motor at J212 and J213
CV101=50 => PWM freq = 73 Hz
102 Short-circuit current 0=0.8 A