W Series Specification

HOW TO ORDER

For correct ordering and to ensure no delays in shipment of your order, the following

descriptive data must be listed in the sequence shown. Necessary information can be

found in other parts of this catalog. The example to the right shows an order for 12

each W locksets in the 581 storeroom function, QUA (Quantum) trim design in a 626

(satin chrome) ﬁ nish, with a 2-

4” backset latch, to accommodate doors 1-

4” thick.

Quantity:

Indicate the quantity required.

Catalog number:

Select function number, cylinder type and latch style from tables in

this section.

Trim design:

Indicate letter of lever design. DAN = Dane; QUA = Quantum; ELI = Elite;

HAN = Hana. Outside design always proceeds inside design on split designs. If adding

an abrasive lever option, add 6 to design code (example 6DAN).

Finish:

When the ﬁ nish is the same for the outside and inside trim it is shown

once (ex.: 626). Outside ﬁ nish always precedes inside ﬁ nish on split ﬁ nishes

(ex.: 605 x 625).

Latches:

4” backset standard. 2-

8” backset available. All latches are UL listed

3-hour A label.

Strikes:

8” x 1-

4” ANSI strike standard. Optional T strike or Full Lip strikes

available. See page 8.

Cylinder type:

6-pin.

Keying Detail:

We suggest using standard terms developed by DHI (Door & Hardware

Institute) or ALOA (Associated Locksmiths of America). Example: AA1-Grand Master

keyed, Master keyed, change key 1.

Interchangeable core:

To order product capable of accepting an interchangeable

core, add sufﬁ ces from the keying table to the function number, preceding the latch

style. Example: W511HD will be supplied with SFIC keyed construction core.

Keyways:

“G” is standard on regular cylinders. “A” is standard on interchangeable

cores. Other keyways available. See page 9.

Additional keys:

Note the total number of keys required.

Large bow keys: Add “with large bow keys” under additional details.