T Series Specification

Latches–Grade 1, UL Listed
Latches for T Series locks are UL Listed. 2-3/4” backset standard.
1” width latch face minimum. Unless otherwise specied, we furnish a 2-1/4” x 1-1/8” x square
corner faceplate on 2-3/4”backset latches front standard.
Note: Specify nish 606, 612, 613, 630
Square Corner
9/16”
Square Corner
3/4”
9/16” Radius Corner
9/16” Projection
Latches–Grade 2, UL Listed For Flat or Beveled Doors
Square Corner
1/2” Projection
1/4” Radius Corner
1/2” Projection
Note: Specify nish 606, 612, 613, 630
T S E R I E S
O P T I O N S A N D A C C E S S O R I E S
Catalog
Number
Description Faceplate Size Corner Projection
A98535-000 2-3/4” Backset Spring 2-1/4” x 1-1/8” Square 9/16”
A98535-00D 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Square 9/16”
A98538-000 2-3/4” Backset Spring 2-1/4” x 1-1/8” Radius 9/16” 9/16”
A98538-00D 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Radius 9/16” 9/16”
A98835-0SD 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Square 3/4”
A98838-0SD 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Radius 9/16” 3/4”
3 Hour
Catalog
Number
Description Faceplate Size Corner Projection
A92320-000 2-3/8” Backset Spring 2-1/4” x 1” Square 1/2”
A92320-00D 2-3/8” Backset Deadlocking 2-1/4” x 1” Square 1/2”
A92321-000 2-3/8” Backset Spring 2-1/4” x 1” Radius 1/2”
A92321-00D 2-3/8” Backset Deadlocking 2-1/4” x 1” Radius 1/2”
A92330-000 2-3/4” Backset Spring 2-1/4” x 1” Square 1/2”
A92330-00D 2-3/4” Backset Deadlocking 2-1/4” x 1” Square 1/2”
A92331-000 2-3/4” Backset Spring 2-1/4” x 1” Radius 1/2”
A92331-00D 2-3/4” Backset Deadlocking 2-1/4” x 1” Radius 1/2”
Latches for T Series locks are UL Listed.
These grade 2 latches have self-adjusting fronts to accommodate beveled or at front doors. Unless
otherwise specied, we furnish a 2-1/4” x 1” x square corner faceplate on these latches.
3 Hour
10