User's Manual
Table Of Contents
- U111290 cover - Falcon
- U111290-01 [AUS]
- 1. Before You Start...
- 2. Cooker Overview
- 3. Rotary clock
- 4. 3 button clock
- 5. Cooking Tips
- 6. Cooking Table
- 7. Cleaning your cooker
- 8. Troubleshooting
- 9. Service and Spares
- 10. Installation
- Provision of Ventilation
- Location of Cooker
- Conversion
- Positioning the Cooker
- Moving the Cooker
- Lowering the Two Rear Rollers
- Completing the Move
- Levelling
- Fitting the Stability Bracket and Chain
- Fitting the Stability Bracket
- Fitting the Restraining Chain
- Gas Connection
- Pressure Testing
- Electrical Connection
- Connection in New Zealand
- Fixed Wiring
- Final Checks
- Final Fitting
- Customer Care
- 11. Conversion to LP Gas
- 12. Servicing
- 13. Circuit Diagram
- 14. Technical Data
14
1 2
1
3
1
2
1
1
1
1
1
1
Step. 1
Step. 1
Step. 2
Step. 2
Step. 3
Step. 4
1
2
3
Check how much time you have left
Cancel the timer alarm
3. Rotary clock
To stop the oven at a specific time of day
(main oven only) You have set the required temperature and
function mode and you would like the oven to automatically
stop.
Minute Minder
Setting the time
Symbol key
Setting the minute minder
Note:
The cook
symbol [ ] remains
visible during normal
operation.
Note:
The cook
symbol [ ] remains
visible during
normal operation.
OR
NOTE
If the alarm is not manually switched o it will stop after
approximately 2 minutes.
When the Minute Minder is active the clock will not dim
between the hours of 10 pm and 6 am
The clock must be set to the time of day before the oven will work
Alarm will sound when cooking has nished, to
cancel follow this step
manual
clock
minute minder
auto
stop time
cook time
n
REMEMBER Turn the oven control knob (s) to 0.
Switch between these two.
Set the time of day you
want the oven to stop
cooking, for example
add 1 hour.
Turn the knob
(1) to ‘AUTO’