User Manual

INSTALLATION

Check the appliance is electrically safe and gas sound when you have nished.

You will need the following equipment to complete the

cooker installation satisfactorily:

• * Restraining chain and hook:

If the cooker is to be supplied with gas through a

flexible hose, a restraining chain and hook MUST be

fitted. These are not supplied with the cooker but are

available at most builders’ merchants.

• Flexible gas hose: Must be in accordance with the

• relevant standards.

• Gas pressure tester/manometer.

• Multimeter: For electrical checks.

You will also need the following tools:

1. Electric drill

2. Masonry drill bit (only required if tting the cooker on a

stone or concrete oor)

3. Wall plugs (only required if tting the cooker on a stone

or concrete oor)

4. Steel tape measure

5. Cross head screwdriver

6. Flat head screwdriver

7. Spirit level

8. Pencil

9. Adjustable spanner

10. 13 mm spanner or socket wrench

11. Screws for tting the restraining chain and bracket

3 pan supports Wok cradle

ArtNo.000-0001 90 Pan supports

ArtNo.000-0009 Wok ring, cast

Griddle plate Grill pan & trivet

2 at shelves Handyrack

ArtNo.324-0003 Handyrack

Roasting tin Plinth

ArtNo.324-0004 Roasting tin

Tall oven shelves and shelf

supports (example shown)

Restraining chain & hook *

ArtNo.000-0010 Tall oven shelves

ArtNo.020-0021 - Restraining

chain & hook

Stability location bracket Stability bracket

Conduit box