Specification Sheet

Inside
Inside
Inside
Inside
76
A U X I L I A R Y L O C K S
L O C K F E AT U R E S • D 2 0 0 S E R I E S • G R A D E 2
D200 Medium Duty Deadlocks 1” Bolt Projection
Door Thickness: 1-
3
/
8” to 1-
7
/
8”. For thicker doors, available
up to 2-
1
/
4”.
Backsets: 2-
3
/
8”- 2-
3
/
4” adjustable deadbolt.
Attachment: Locks are solidly attached to the door by
1
/
4”
heat-treated steel bolts. These bolts pass through a steel
plate (D211, D221 and D241) or the inner cylinder housing
(D231) and thread directly into the back of the outer cylinder
housing.
Handing: Non-handed. May be used in right hand or left
hand doors swinging in or out.
Cylinders: Furnished with solid brass plug and housing,
drilled with 6-pin chambers, pinned in 5 unless otherwise
specied. Available with 6 or 7-pin interchangeable cores.
Furnished with two (2) nickel silver keys standard.
Keyways: “G” keyway standard on conventional cylinders.
“A” keyway standard on I/C core cylinders. Also available with
some optional keyways.
Exposed Trim: Wrought brass or bronze reinforced with
steel insert.
Deadbolts: Deadbolt locks are furnished with deadbolts which
have a full 1” projection. Housed within the deadbolt is a free-
turning,
1
/
4” thick, hardened steel, saw-resistant roller. Furnished
standard with 2-
3
/
8”- 2-
3
/
4” adjustable backset and 1-
1
/
8” x 2-
1
/
4”
faceplate. Optional 1” x 2-
1
/
4” faceplate. Consult Options and
Accessories section for other optional faceplates. D200 bolt is
cast zinc.
Strikes: 2-
3
/
4” x 1-
1
/
8” lipless standard. ANSI 4-
7
/
8” x 1-
1
/
4” lipless,
2-
1
/
4” full lip strikes, a 2-
3
/
4” x 1-
1
/
8” T-strike or a security strike are
available. Consult Options and Accessories section.
Screws: Furnished with wood/machine screws for use on wood or
metal doors or frames.
ANSI/BHMA Standard: A156.5, 2001, Grade 2. UL Listed, A
label, 3 hour.
Classroom Deadlock (Schoolhouse Safety)
Deadbolt thrown or retracted by key from outside. Inside turn will
only retract bolt. Bolt automatically deadlocks when fully thrown.
ANSI/BHMA E01712
Cylinder Deadlock
Deadbolt thrown or retracted by key only. Blank plate
inside. Bolt automatically deadlocks when fully thrown.
ANSI/BHMA E01622
Double Cylinder Deadlock
Deadbolt thrown or retracted by key from either side. Bolt
automatically deadlocks when fully thrown.
ANSI/BHMA E21422
Single Cylinder Deadlock with Turn
Deadbolt thrown or retracted by key or by turn. Bolt
automatically deadlocks when fully thrown.
ANSI/BHMA E21522
D221
D231 D241
D211
2-3/8” or 2-3/4”
5/32”
Backset
(from center
of door for
beveled stile)
2-1/8” or 1-1/2” Dia.
3/8” Overdrill
1” or 1-1/8”
2-1/4” 1-5/8”
1” Dia.
Common C
L
Door, Lock & Strike
1-1/8”
1-1/4” 2-1/8” 2-3/4”
23/64”
23/32”
STANDARD STRIKEDOOR EDGEELEVATION
Inside