Specification Sheet

A U X I L I A R Y L O C K S
L O C K F E AT U R E S • D 1 0 0 S E R I E S • G R A D E 1
54
Door Thickness: 1-
3
/
8” to 1-
3
/
4”. Up to 2-
1
/
4” door thickness
also available.
Backsets: 2-
3
/
8” - 2-
3
/
4” adjustable deadbolt.
Attachment: Locks are solidly attached to the door by
1
/
4” heat-treated steel bolts. These bolts pass through a
steel plate (D111, D121 and D141) or the inner cylinder
housing (D131) and thread directly into the back of the outer
cylinder housing.
A permanent cap is inserted over the inside cylinder (D131)
making the bolts nearly impossible to remove.
Handing: Non-handed. May be used on right hand or left
hand doors swinging in or out.
Cylinders: Furnished with solid brass plug and housing,
drilled with 6-pin chambers, pinned in 5 unless otherwise
specied. Also available with 7-pin cylinders. Available with 6
or 7-pin interchangeable cores. Furnished with two (2) nickel
silver keys standard.
Keyways: “G” keyway standard on conventional cylinders.
“A” keyway standard on I/C core cylinders. Also available with
some optional keyways.
D100 Heavy Duty Deadlocks 1” Bolt Projection
Exposed Trim: Wrought brass or bronze reinforced with
steel insert.
Deadbolts: Deadbolt locks are furnished with deadbolts which
have a full 1” projection. Housed within the deadbolt is a free-
turning,
1
/
4” thick, hardened steel, saw-resistant roller. Furnished
standard with 2-
3
/
8”- 2-
3
/
4” adjustable backset and 1-
1
/
8” x 2-
1
/
4”
faceplate. Optional 1” x 2-
1
/
4” faceplate. Consult Options and
Accessories section for other optional faceplates. D100 bolt is high
strength steel.
Strikes: 2-
3
/
4” x 1-
1
/
8” lipless strike standard. ANSI 4-
7
/
8” x 1-
1
/
4”
lipless, 2-
1
/
4” full lip strikes, a 2-
3
/
4” x 1-
1
/
8” T-strike or a security
strike are available. Consult Options and Accessories section.
Screws: Furnished with wood/machine screws for use on wood
or metal doors or frames.
ANSI/BHMA Standard: A156.5, 2001, Grade 1. UL Listed, A
label, 3 hour.
Single Cylinder Deadlock
Deadbolt thrown or retracted by key only. Blank plate inside.
Bolt automatically deadlocks when fully thrown.
ANSI/BHMA E01611
D111
Classroom Deadlock (Schoolhouse Safety)
Deadbolt thrown or retracted by key from outside. Inside turn will
only retract bolt. Bolt automatically deadlocks when fully thrown.
ANSI/BHMA E01711
D121
Double Cylinder Deadlock
Deadbolt thrown or retracted by key from either side. Bolt
automatically deadlocks when fully thrown.
ANSI/BHMA E01411
Single Cylinder Deadlock with Turn
Deadbolt thrown or retracted by key or by turn. Bolt
automatically deadlocks when fully thrown.
ANSI/BHMA E01511
Inside
D131
D141
2-3/8” or 2-3/4”
5/32”
Backset
(from center
of door for
beveled stile)
2-1/8” or 1-1/2” Dia.
3/8” Overdrill
1” or 1-1/8”
2-1/4” 1-5/8”
1” Dia.
Common C
L
Door, Lock & Strike
1-1/8”
1-1/4” 2-1/8” 2-3/4”
23/64”
23/32”
STANDARD STRIKEDOOR EDGEELEVATION
Inside
Inside
Inside
Inside
Inside