User Manual
Table Of Contents
- 1Introduction
- 2Security
- 2.1General information
- 2.2Exposure to RF energy
- 2.3Efficient modem operation
- 2.4Antenna care and replacement
- 2.5Driving
- 2.6Electronic devices
- 2.7Vehicle electronic equipment
- 2.8Medical electronic equipment
- 2.9Aircraft
- 2.10Children
- 2.11Blasting areas
- 2.12Potentially explosive atmospheres
- 2.13Non-ionizing radiation
- 3Safety standards
- 4Technical data
- 5STEPPIII application interface
- 6Hardware Interfaces
- 7Housing
- 8STEPPII-Mounting cradle
- 9RF Exposures
- 10Appendix
STEPPIII Hardware description Version 1.0.0
6 HARDWARE INTERFACES
This chapter describes the hardware interfaces:
• Molex 16-pin connector pinout
• AMP 15-pin connector pinout
• RF interfaces
• SIM interface
• LED’s indicator
Interface specifications
Interface A Molex 16-pin connector (43045-1609)
Interface B SIM card reader for small SIM cards (3V)
Interface C
GPS RF Connector 50 Ω Fakra/Radiall (SMB-Male)
Interface D
GSM RF Connector 50 Ω Fakra/Radiall (SMB-Male)
Interface E AMP 15-pin connector (5-558556-1)
Interface F Optical LED indicators. Free programmable.
Table 6: Interface specifications
Figure 3: Interface specifications
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 22