THIS DOCUMENT IS AVAILABLE AT http://www.falcom.de/ Keyfob Hardware description (brief) Preliminary/Draft Version 1.
KEYFOB HARDWARE DESCRIPTION VERSION 1.00 Index of contents 0 INTRODUCTION .......................................................................4 0.1 GENERAL ................................................................................................................................4 0.2 CIRCUIT CONCEPT ...................................................................................................................4 1 TECHNICAL DATA ...........................................................
KEYFOB HARDWARE DESCRIPTION VERSION 1.00 Version history: Version number Author 1.00 Fadil Beqiri Changes - Initial version This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
KEYFOB HARDWARE DESCRIPTION VERSION 1.00 Cautions Information furnished herein by FALCOM are accurate and reliable. However, no responsibility is assumed for its use. Please, read carefully the safety precautions. If you have any technical questions regarding this document or the product described in it, please contact your vendor. General information about FALCOM and its range of products are available at the following Internet address: http://www.falcom.
KEYFOB HARDWARE DESCRIPTION VERSION 1.00 0 INTRODUCTION 0.1 General This description is focused on the IEEE 802.15.4TM Keyfob remote control from FALCOM GmbH. It contains short information about purpose and use of the Keyfob concept. The Keyfob remote control contains an IEEE 802.15.4TM module that works on the 2.4 GHz ISM-Band. It uses 16-channels in interval of 5 MHz (2405–2480 MHz).
KEYFOB HARDWARE DESCRIPTION Figure 1: VERSION 1.00 Architecture of the Keyfob remote control This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
KEYFOB HARDWARE DESCRIPTION VERSION 1.00 1 TECHNICAL DATA 1.1 General specifications of Keyfob Power supply: Operating voltage from 2.4 V to 3.3 VDC Powered by 2 x AAA batteries Temperature range: Normal operation: -25 °C to +55 °C Physical characteristics: Size: 66 mm x 46 mm x 20 mm Weight: approx. 55 g Audio: 1 x Buzzer Vibration: 1 x Vibrator Connectivity: IEEE 802.15.4TM connectivity. Channels: 16 channels Channel Frequency 1 2.405 GHz 2 2.410 GHz 3 2.415 GHz 4 2.420 GHz 5 2.425 GHz 6 2.
KEYFOB HARDWARE DESCRIPTION VERSION 1.00 2 BI-DIRECTIONAL KEYFOB, REMOTE OPERATION The Keyfob gives you remote operation of your security system. This Keyfob operates with the push of one button or buttons combination. It also gives you direct feedback on its operation with a blinking light as well as with voice prompts, so you can be sure that your security system is operating as you intended. The communication to the Keyfob unit is based on the IEEE 802.15.4 wireless network systems.
KEYFOB HARDWARE DESCRIPTION VERSION 1.00 Actions and Reactions of the Keyfob while performing activations Items Actions generated by Key combination Buttons Reaction Possibilities Meaning Short pressing = press the button for less then 2 seconds Long pressing = press the button for longer then 2 seconds 1 B1 2 3 B2 4 while the B1 is pressed the L1 blinks one time, after the B1 is released, each of L1 and L3 blinks one time in sequence and two beep tones are respectively short pressing genereated.
KEYFOB HARDWARE DESCRIPTION VERSION 1.00 3 RF EXPOSURES This device contains 2.4 GHz IEEE 802.15.4 wireless functions that is operational in this frequency. The following statements according to the FCCs are only applied for the Keyfob. Statement according to FCC part 15.19: This device complies with Part 15 of the FCC Rules.
