User Manual

FOX HARDWARE MANUAL - PRELIMINARY - VERSION 1.0.0
4 TECHNICAL DATA
4.1 Product features
 Supply voltage range:
➢ Operating power supply voltage range of +10.8 V to
+35.0 V , suitable for direct connection to an automotive
+12V or +24V DC power source (car battery).
 Power saving:
➢ 8 different energy-saving modes - programmable with
PFAL commands.
 Operating temperature range:
➢ -40°C to + 85°C (see chapter 4.1.2 for more details)
 Physical characteristics:
➢ Size: 56.0 ± 0.1 mm x 172.0 ± 0.1 mm x 39.0 ± 0.1 mm
➢ Weight: ca. 229 gr.
➢ C able length: 1 m
 Physical Interfaces:
➢ Eight-wire cable with an 8-pin connector on the end:
✔ 3 x I/Os multi functional (Input/Output and Analog
Input),
✔ 1 x Ignition (with software - controlled feature),
✔ 1 x Power supply (with software - controlled feature)
✔ 1 x Serial port (Rx, Tx), Baud rate is controlled by firmware
(by default 57600 bps), 8 data bits, no parity, 1 stop bit,
no flow control,
➢ SIM Card interface (for 1.8 and 3 V SIM cards)
➢ 3 x LED indicators (free-programmable by the software)
 Hardware options
➢ CAN interface – occupies 2 of 3 available I/Os (IO2 and IO3),
➢ 3D motion sensor,
➢ Micro-SD - for additional memory (CAN),
 Casing:
➢ Fully shielded
 Certifications:
➢ Fully type approved confirming with R&TTE directive,
➢ FTA / FCC /PTCRB/ e1 / CE
 Directive:
➢ RoHS compliant.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 13 of 31