Operation Manual

26
AFTER USE
GB
NOTE!
Do not use chemical, steel, wooden or abrasive
cleaners to scrape the soleplate.
Cleaning and
maintenance
Before cleaning, firstly disconnect the power outlet and let
the appliance cools down.
1. Wipe flakes and any other deposits on the soleplate with
a damp cloth or a non-abrasive (liquid) cleaner.
2. Clean the upper part of iron with a soft damp cloth. Wipe
the water drop on the steam generator and the thermal
insulating cushion with dry cloth.
3. To remove the mineral deposits collecting at inner steam
generator, firstly put the iron horizontally on a level surface,
then tilt the steam generator and unscrew the drain water
cap with the attached screwer, and then drain the steam
generator, see Fig. 4.
UYARI!
During the operation or after finish ironing, never place
the hot soleplate on the area except the thermal
insulating cushion. (see Fig.3)
Fig. 3