Operation Manual

OPERATING

CAUTION!

1) Do not touch hot soleplate at any time before cooling

down!

2) Never direct the steam at people!

6. According to your requirement, you can select the

desired steam output for each garment, there are three

modes of low, medium, high on available. Make sure that

there is enough water in the tank.

7. After ironing, press down the ON/OFF switch for a while

and the appliance will be turned off, all the indicators will

be extinguished. Remove the plug from the wall socket.

But the soleplate is still hot, never touch it with hand.

8. After cooling down, you can replace the iron onto the

thermal insulating cushion according to the following

operation: firstly, you can insert the back of the iron into the

rear support hook, then put the soleplate on the locking pin

and press the locking pin down, and then you can rotate

the iron clockwise until the iron is fixed into the front

support hook (see Fig. 2). At this time, the iron can be

secured onto the thermal insulating cushion.

Fig. 2