Operation Manual

22
BEFORE USE
GB
Steam switch The steam rate can be selected low, medium or high with
one button operation. You can select your desired steam
rate by pressing the “Steam switch”. And there are three
corresponding indicators to indicate the steam rate you
have selected. The default setting is low steam rate. Any
one to be selected, its indicator will flash, after a few
minutes, the indicator will be changed to illuminating. At
this time, the appliance can produce steam and you can
use the steam for ironing.
Lack of water indicator If less water in the tank, the indicator will be illuminated,
following with two “D” sounds of buzzer, the steam
generator stops working. It prompts you to add water into
the tank.
Descaling indicator If the descaling indicator illuminating, it indicates the steam
generator shall be cleaned by virtue of the mineral deposits
collecting to a degree. When the system ensures the
mineral deposits have been removed, the indicator will be
extinguished.
Drain water cap Open the cap for cleaning the steam generator (see Fig. 4).
Cord clamp When not in use, the iron cord and power cord shall be
stored. Pull out the cord clamp first, after winding the cord
around the cord winding groove, push the cord clamp back.
Locking pin The iron can be tightly secured onto the thermal insulating
cushion by the locking pin.
Automatic power off The appliance will be automatically turned off if no steam
sprayed out from the soleplate within 10 minutes.