Instruction manual

77
Inserting battery:
• Ensure the unit is set to ‘off’.
• Simply unscrew the base of the main unit to
access the battery compartment.
• Insert a fresh battery, observing the correct
polarity as indicated in this diagram.
• Screw the base firmly back onto the body of the
unit.
Usage:
Trimming ear hair:
• Switch the trimmer on and carefully insert it into
the outer parts of your ear.
• Carefully move the trimmer along hairy parts of
your ear. The unwanted hair will be cut instantly.
Trimming nasal hair:
• Switch the trimmer on and carefully insert it into
the front of the nostril.
• Remove nasal hear by carefully moving the
trimmer in a circular motion. The unwanted hair
will be cut instantly.
Defining outlines:
• Switch the trimmer off.
• Turn the cutting head anticlockwise and take it
off.
• Place the detail trimmer on the unit and turn it
tight clock-wise.
• Move the detail trimmer at a shallow angle across
the skin from top to bottom without applying
pressure. Do not move the unit from bottom to
top and do not guide it sideways. You could cut
yourself.
Cleaning:
• Please switch the appliance off.
• Wipe the outer of your unit with a soft, damp
cloth.
• Please do not immerse your appliance in water
or any other liquid.
• If the unit is not to be used for over 3 weeks,
take the battery off from the appliance.
• For cleaning the circle cutting blade, simply turn
the circle cutting blade to right side for taking
out the whole blade, remove any hairs left in the
cutting blade using the cleaning brush supplied
after that, clean the circle cutting blade under
the running water. The blades are stainless steel.
• Always keep the blades dry completely, before
putting them on your appliance again.
• Never wash the circle cutting blade under the
water when it is fitted to your nose trimmer.
• Before cleaning the detail trimmer, switch the
appliance off.
• Simply turn the detail trimmer to right side for
taking out from the unit.
• Twist the head off the body and push the blades
away from the head as shown in the diagram.